Best Desoldering Wick in USA

# Preview Product Price
1 Lesnow solder wick braid with flux Super 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components Lesnow solder wick braid with flux Super 10ft Length Desoldering Wick Braid Remover Tool Solder... $7.49
2 Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool... $5.29
3 NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098' Width, 10' Length NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length $11.79
4 MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1' Width, Blue MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width,... $3.15
5 AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with... $11.99
6 SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack of 10 Foot Solder Wick Spools SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy... $10.99
7 MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075' Width, Green MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075"... $13.18
8 GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,65'Length x 0.12'Width GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA... $28.99
9 TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 9.8' TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder... $5.99
10 GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,59'Length x 0.12'Width GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA... $6.99
11 TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder... $8.99
12 MG Chemicals - 452 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 50' Length x 0.05' Width, Yellow MG Chemicals - 452 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 50' Length x 0.05"... $24.55
13 Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm) Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length... $8.99
14 MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch... $4.89
15 TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering... $10.99
16 MG Chemicals 426-NS #4 No Clean Super Wick Desoldering Braid, 0.1' Width x 5' Length, Blue MG Chemicals 426-NS #4 No Clean Super Wick Desoldering Braid, 0.1" Width x 5' Length, Blue $6.24
17 Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10', 50ft. Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft. $24.95
18 Itw Chemtronics Desoldering Braid, Soder-Wick, Rosin.080', 25', 50-3-25 Itw Chemtronics Desoldering Braid, Soder-Wick, Rosin.080", 25', 50-3-25 $20.08
19 Aven 17541 Desoldering Wick, 2mm Width Aven 17541 Desoldering Wick, 2mm Width $2.92
20 CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool,... $5.99

There are a lot of products and services available in the market. Consumers find it difficult to choose the best product that meets their needs. In order to help consumers with that process, we have compiled a list of Top 20 Best Desoldering Wick, which will allow them to make a more informed decision when buying any product or service.

Before finalizing these products, our team considered numerous factors, such as customer feedback, features, specifications, and price. This list is a useful tool for all of our readers who are looking for The 20 Best Desoldering Wick. Hopefully you find it useful!

Best Desoldering Wick

Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Remover Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components

$11.99
$7.99
 in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

$11.79  in stock
4 new from $11.50
Free shipping
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Available with standard or anti-static bobbins

MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue

$3.15  in stock
4 new from $3.09
Free shipping
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Oxide-free clean copper
  • Static free bobbins
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Manufactured under SPC guidelines
  • Designed to leave a residue that is environmentally safe

Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

$6.49
$5.49
 in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
  • 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
  • 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
  • 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

$11.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size

SRA No-Clean Desoldering Wick - 3 Pack of 10 Ft. Spools

$9.99  in stock
2 new from $9.99
Free shipping
Amazon.com
as of April 14, 2022 11:55 am

Features

  • 10FT SUPER SIZED SPOOLS: 30 Feet of standard width desoldering wick infused with no-clean flux.
  • QUALITY MATERIALS: Impurity-free copper braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
  • EASY TO USE: Simply place over work and heat to correct soldering mistakes, remove unwanted solder from parts and terminals and break solder bridges.
  • FAST & EFFECTIVE: Unique gapped-weave coated braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
  • PCB SAFE RESIDUES: Leaves very little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'

$5.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
  • Warranty :If you have any questions, please feel free to contact us at any time. Thank you!

MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075" Width, Green

$13.18  in stock
7 new from $10.17
Free shipping
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Oxide-free clean copper
  • Static free bobbins
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Manufactured under SPC guidelines
  • Designed to leave a residue that is environmentally safe

Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)

$8.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering

TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

$8.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand.
  • 3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m; width: 2.5mm), Suction Pump Size (length: 21cm).
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable.
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs.
  • Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!

MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length

$4.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random.
  • ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft.
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

$8.99
$7.99
 in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.

Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.

$23.64  in stock
2 new from $23.64
Free shipping
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Ultra-thin desoldering wick
  • Responds as much as 50% faster than conventional desoldering braids
  • Lighter mass and pure copper braid construction
  • Better thermal conductivity, even at low temperatures
  • Overheating minimized by requiring less heat for shorter time

CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length

$4.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • ☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks
  • ☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder.
  • ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering.

12 Pieces Solder Wick Solder Braid Wick Set Desoldering Braid Wick (2.0 mm, 2.5 mm, 3.0 mm)

$13.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it
  • Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency
  • Extensive applications: the braided solder wicks are suitable for labs, home, school and industry welding work; And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work

CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length

$5.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • ☃[Package Include] You will get 3 packs No-Clean Solder Braided Wicks
  • ☃[Appropriate Size] Package includes 1 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick.
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder.
  • ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering.

MIKIMIQI Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length for Each Solder Wick

$4.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • ❤ Package Include - You will get 2 packs No-Clean Solder Braided Wicks.
  • ❤ Appropriate Size - The size of each solder wick is 2.5mm x 1.5m / 0.1inch x 5 ft.
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.

MG Chemicals - 452 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 50' Length x 0.05" Width, Yellow

$25.95
$23.51
 in stock
4 new from $23.51
Free shipping
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Oxide-free clean copper
  • Static free bobbins
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Manufactured under SPC guidelines
  • Designed to leave a residue that is environmentally safe

MG Chemicals 425-NS No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length

$7.95  in stock
2 new from $7.95
Free shipping
Amazon.com
as of April 14, 2022 11:55 am

Features

  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • High purity, oxide-free copper
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • Environmentally and PCB safe residues
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209

TOWOT Desolding Pump & 2PCS Desoldering Wick (Width: 2.5mm; Length: 1.5m) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

$8.99  in stock
Amazon.com
as of April 14, 2022 11:55 am

Features

  • 3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m; width: 2.5mm), Suction Pump Size (length: 21cm).
  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand.
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable.
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs.
  • Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!

Related Posts

Leave a Reply

Your email address will not be published.